What is the difference between SoC and a CPU core?

What is the difference between SoC and a CPU core?



The CPU finally has a competition from a new start called SoC after more than 50 years in front of the heap. You can go into a store for decades and select a new computer based on your CPU–and now, from smartphones to tablets, and even laptops, SoCs come into being everywhere you look. Don't be worried, however, CPUs and SoCs are pretty much the same and almost all you know about CPUs can be used for SoC's. In this image you can see the apple SoC.

What is the difference between SoC and a CPU core?
What is the difference between SoC and a CPU core?


What is CPU ?

A core of CPU is merely a calculator. It can not do much but crack a memory-reading program. A good example is an Intel x86 CPU. In addition to the Front Side Bus (FSB), the CPU rely on other chips, providing the required bridges from FSB to DDR. The chips are called bridge chips. The Bridge North and the Bridge South. Typically an Intel x86 CPU flavor must be coupled with the respective bridge chip family. 

It is ultimately a very rapid calculator despite the strong emphasis placed on CPU technology and performance. It collects memory data, and then performs some kind of logical (and, or ,not) arithmetic operation on that data. It is more costly and complex the CPU, the faster your computer can process the more data it processes. 

What is the difference between SoC and a CPU core?
What is the difference between SoC and a CPU core?



However, a CPU is not an individual computer itself— it requires a whole set of silicon chips. There needs to be a memory to hold the data, an audit chip to decode and amplify your music and a graphics processor that can draw pictures from your monitor. 

what is SoC?


One or more CPU cores are included in a SoC. A system-on-chip is a SoC. It's far more than just a CPU. A CPU is usually known as a microprocessor. A SoC can be called a "microcontroller" Sometimes .

A typical SoC has some or all of the CPU interfaces with the same die or packet as the center of the CPU. So that a SoC has DDR, PCI, PCIe interface, etc. 

What is the difference between SoC and a CPU core?
What is the difference between SoC and a CPU core?




The SoC usually offers pin numbers. With the density of the interfaces offered, it is ridiculous to have more pins to support each independently. So a SoC uses a door sometimes referred to as a pin mux. As a component of the SoC, it controls the interfaces through which pins can be accessed. The exercise of selecting a software involves finding one with all the interfaces, which support all these interfaces in conjunction with a specific pin mux configuration. If it doesn't, no matter what you do, you won't be able to get what you want from the SoC.

What is the difference between SoC and a CPU core?
What is the difference between SoC and a CPU core?


Almost all of these components are incorporated into one silicone chip by a Socket  to name it fully. In addition to a CPU, SoC usually contains a GPU, memory, USB controller, power management system and wireless radio (Wi-Fi, 3 G, 4 G LTE, etc.).). Without tens of other chips, a CPU can only operate with a single SoC, and you can only create complete computers. 

 Difference between an CPU and SoC.


The advantage of SoC number one is its size: a SoC is a bit bigger than a CPU, but still has many more functions. Using a CPU, it's very difficult to square a computer less than 10 cm (4 inches) because you just have to squeeze in a few chips. We can place full computers on smartphones and tablets with software sound systems and still have plenty of room. 

What is the difference between SoC and a CPU core?
What is the difference between SoC and a CPU core?

Due to its very high integration rate and much shorter cables, a SoC also uses much less power–once again, mobile computers have a great advantage. Reducing the number of physical chips  SoC means that building a computer using a computer is also considerably cheaper. 

A SoC has a complete lack of flexibility, the only true disadvantage. You can always use your PC to set up a new CPU, GPU or RAM — your smartphone is not able to do likewise. SoCs which you can buy in the future may be wasteful and expensive, however, because it's all integrated, only if you want to add more RAM. 

Thank so much for reading the What is the difference between SoC and a CPU core?

What is the difference between SoC and a CPU core?



Top 10 Tips on How To Get Views on YouTube.

10 Tips on How To Get Views on YouTube.




YouTube is a widely utilized search engine for the promotion, fun, and education of audiences. As the second largest in the world. YouTube receives approximately 22 billion visits per month and averages less than 40 minutes of session time.

However, like everything on the Web, it was a pursuit of people who began to spend money–sometimes through shady companies–on promoting their content. People are buying YouTube views with the hope that either YouTube's algorithms are fooled or people are convinced that many others watched their video, too. 

There are only a few problems with this approach: The bot detection abilities of YouTube improve and improve The algorithms focus more on user behavior and not on view counts. 

Top 10 Tips on How To Get Views on YouTube.
10 Tips on How To Get Views on YouTube.



10. Tips To Get Views on YouTube.


1.  Use rich titles and descriptive keywords.


This is where your keyword research is at stake. There are two things to do with a descriptive and interesting title: to provide keywords for the algorithm that are relevant and attract users and inform them about the video. You can use typical SEO methods such as the use of keyword planners or other keyword research tools to carry out keyword research. 


Top 10 Tips on How To Get Views on YouTube.


2. Encourage Viewers to Subscribe.


This makes it easy to encourage your current viewers to subscribe because the number of views you get on each new video that you are releasing increases as a gaining subscriber. 

3. Create playlists. 

To enable viewers to view it consecutively, create playlists for the contents. Once the first video has expired, your other videos will play automatedly, providing more views on each video played without having to browse the players. You can include, post or share playlists on your channel to increase the total views for each playlist. 


Top 10 Tips on How To Get Views on YouTube.


4. Creates Viral Trends videos. 

Creates video content to remove existing viral trends. There is also a market desire already built into the context of a viral phenomenon to view content, so you should tap into it. 


Top 10 Tips on How To Get Views on YouTube.



5. Improve your image thumbnail. 

Your thumbnail image can work wonderfully, like a hero picture, when it increases your YouTube views, whether it is on the organic result page. When featured in your video, use high-quality images, that include legible and engaging fonts and face closures. 


Top 10 Tips on How To Get Views on YouTube.


7.End screen creation.

Final screens are used to do a little at the end of your video. The unique function. It is an opportunity to provide users with the information about your channel and other playlists, recommended videos and your verified website that has been used for their content. 

Whether more subscribers are being acquired or linked to other videos, both the optimization functions can boost your YouTube views directly or indirectly. Go to the Video Manager to add end screens, click Edit the video to be added and then clicks Finish Screens & Annotations. You can add further features from there. 

8. Fill out your videos with a watermark. 

Watermarks enable you to gain more subscribers and YouTube views throughout all of your videos through your channel. A watermark is basically only an image you can put on all your videos — most brands use its logo. 

 9. Promote the Videos on Other Social Channels.

Each time you upload a new video to YouTube, if you have followers on other social channels. A quick teaser video is a good way to do this. In the following example, we created a minute teaser for a new YouTube video, then posted it with a link to the full video in the YouTube channel on the Facebook page. 




10. Upgrade your video titles.

As we know that YouTube is a search engine which means search engine optimization (SEO) matters.YouTube is a search engine. Which means search engine optimization (SEO) matters.So include as much as possible of the information. 

Thank you so much for reading the 10 Tips on How To Get Views on YouTube.

Top 10 Tips on How To Get Views on YouTube.



What is Tape Carrior package?

Tape Carrior


  • Tape carrior is extension of PLCC.
  • Tape carrior is small in size and high in memory.
  • Tape carrior is used in note pad,cell phone,laptops,tablets and in portable electronic devices.
  • Tape carrior is directly install in PCB in simple swapped socket.
  • Tape carrior has not only external packaging also used roll of thin plastic.
What is Tape Carrior package
Tape Carrior package

Thank you so much for reading the What is Tape Carrior package?



  1. DIP (Dual Inline Packaging).Click Here
  2. PGA (Pin Grid Array).Click Here
  3. SGPA (Staggerd Pin Grid Array).Click Here
  4. MCM (Multi Chip Module).Click Here
  5. LCC (Leadless Chip Carrior).Click Here
  6. PLCC (Plastic Leaded Chip Carrior).Click Here
  7. CPU Packaging in detail.Click Here

What is Tape Carrior package

What is PLCC(Plastic Leaded Chip Carrior)?

PLCC(Plastic Leaded Chip Carrior


  • PLCC is in 'j' structure four sided plastic body package.
  • Lead count range 20 to 84 mbps & body structure is 1.27mm.
  • PLCC is reduce the cost of LCC.
  • PLCC is introduces in 1983 and provided swappable socket for fast transmission in ROM.
  • PLCC is the extention of LCC.
What is PLCC(Plastic Leaded Chip Carrior)

  • PLCC is a SMD integrated circuit package that allows ICs to be attached either directly to a board or within a socket on a printed circuit board. 
  • It offers the options of developing the same IC in which the PLCC may need to be regularly deleted for such reasons as firmware update. The PLCC can then be soldered to the board if the design is stable. 
Thank you so much for reading the What is PLCC(Plastic Leaded Chip Carrior).



  1. DIP (Dual Inline Packaging).Click Here
  2. PGA (Pin Grid Array).Click Here
  3. SGPA (Staggerd Pin Grid Array).Click Here
  4. MCM (Multi Chip Module).Click Here
  5. LCC (Leadless Chip Carrior).Click Here
  6. TC (Tape Carrior).Click Here
  7. CPU Packaging in detail.Click Here

What is PLCC(Plastic Leaded Chip Carrior)?

What is LCC (Leadless Chip Carrier)?

LCC (Leadless Chip Carrier)


  • In LCC (Leadless Chip Carrier) a surface mounting device[SMD] which uses board attachment surfaces on the sides of its body and has no legs or leads. On all four sides of the package, a chip carrier has a terminal. 
  • LCC is IC package that has no pins leads for connection.
  • Usually, a leadless chip carrier is square or rectangular. 
  • In contrast to other integrated circuit packaging, leadless chip carriers do not connect to devices via pins, but by means of pads or metal pads on the packet's periphery. 
  • In LCC easy and comfortable direct insertion on your connector mounted on the circuit board is leadless chip carrier. 
  • LCC is a low-cost surface-mounting solution because it is lightweight and does not feature any outside metal legs or leads. No hole is required for leadless chip carriers, unlike dual-inline packages. 
  • LCC are light weight and used for direct to its socket in PCB .

Thank you so much for reading the What is LCC (Leadless Chip Carrier).



  1. DIP (Dual Inline Packaging).Click Here
  2. PGA (Pin Grid Array).Click Here
  3. SGPA (Staggerd Pin Grid Array).Click Here
  4. MCM (Multi Chip Module).Click Here
  5. PLCC (Plastic Leaded Chip Carrior).Click Here
  6. TC (Tape Carrior).Click Here
  7. CPU Packaging in detail.Click Here
What is LCC (Leadless Chip Carrier).

What is MCM(multi chip module)?

MCM(multi chip module)

  • A multi Chip Module (MCM) is usually an electronic component, with the integration of multiple integrated circuits, semiconductor dies, and/or other discrete components usually on a unifying suspension, so it is treated as a single component (as if it were a larger component) in use.
  • A multi chip module (MCM) is a multifaceted, integrated circuit (IC) package assembled in one device.
  • MCMs are more efficient and can significantly reduce the size of a device.
  • MCM improves performance as the interconnection length between the dies is reduced, also with the Lower Power Induction.
  • MCM has lower load capacity and less crosstalk.
  • MCM has lower power off - chip driver and smaller size. 
  • MCM low cost silicon sweeping and reliability improved.
  • Increased flexibility, as well as simplified design and complexity in the case of several components being packaged in one device, in order to integrate various semiconductor technology.
  • A new development called MCM chip - stack allows vertical configuration of dies with identic pinouts, which enables further miniaturization, making them suitable for use in personal digital assistants and mobile phones.

Thank you so much for reading the  What is MCM(multi chip module) packaging.


  1. DIP (Dual Inline Packaging).Click Here
  2. PGA (Pin Grid Array).Click Here
  3. SGPA (Staggerd Pin Grid Array).Click Here
  4. LCC (Leadless Chip Carrior).Click Here
  5. PLCC (Plastic Leaded Chip Carrior).Click Here
  6. TC (Tape Carrior).Click Here
  7. CPU Packaging in detail.Click Here
What is MCM(multi chip module) / MCM in detail.

What is SPGA (Staggered Pin Grid Array)?

SPGA (Staggered Pin Grid Array)

  • SPGA is a extention of PGA.
  • An integrated socket type or a pin  out with a staggered pin grid array with the edge of the socket, placed in a few squares. The structure is also referred to as crossing squares.
  • In SPGA the pin arrangement in digonal row.
  • SPGA include 2 squre array of pin in both direction.
  • SPGA is ideal for high pin density devices.
  • SPGA is usually used for Socket 5, Socket 7 and Socket 8 platform motherboards for processors.
  • SGPA is used for reduced the size of microprocessor.
  • The advantage of SGPA is that it consist of claster pin and more pins for a specific surface.
  • SGPA has better transfer capacity in a similar size chip.

Thank you so much for reading the  What is SPGA (Staggered Pin Grid Array) packaging.


  1. DIP (Dual Inline Packaging).Click Here
  2. PGA (Pin Grid Array).Click Here
  3. MCM (Multi Chip Module).Click Here
  4. LCC (Leadless Chip Carrior).Click Here
  5. PLCC (Plastic Leaded Chip Carrior).Click Here
  6. TC (Tape Carrior).Click Here
  7. CPU Packaging in detail.Click Here

What is SPGA (Staggered Pin Grid Array)  / SPGA in detail.

What is PGA(Pin Grid Array)?

PGA(Pin Grid Array)

  • PGA is used in 5th Genration processors.
  • PGA is rectangular or square in shape mount in PCB(Printed circut Board).The pins are usually 2.54 mm apart (0.1") and can cover the whole underneath of the package.
  • PGA has large width Data Bus as compare to DIP(Dual inline Package).
  • PGA starts with Intel 80286 microprocessors.
  • PGA is in Plastic Packageing layout with organic plate.

What is PGA(Pin Grid Array) / PGA in detail.
What is PGA(Pin Grid Array)

  • The biggest advantage is the number of pin are maximum as compare to DIP so that the more connection are established.
  • PGA is less reliable due to number of maximum pin makes limitation on electrical capabilities.
  • PGA is cheaper then other Grid.
  • Depending on the size and complexity of the IC, the array may form a number of parallel rows of pins on two opposite sides of the package or around all 4 sides.

Thank you so much for reading the What is PGA(Pin Grid Array)  packaging.


Know about the more packaging in detail click in given link.
  1. DIP (Dual Inline Packaging).Click Here
  2. SGPA (Staggerd Pin Grid Array).Click Here
  3. MCM (Multi Chip Module).Click Here
  4. LCC (Leadless Chip Carrior).Click Here
  5. PLCC (Plastic Leaded Chip Carrior).Click Here
  6. TC (Tape Carrior).Click Here
  7. CPU Packaging in detail.Click Here

What is PGA(Pin Grid Array) / PGA in detail.

What is DIP (Dual In-line Package)?

DIP (Dual In-line Package)

  • DIP (Dual In-line Package) was developed in 1960 by Intel.
  • DIP (Dual In-line Package) is mounted in PCB(Printed Circut Board).
  • The shape of DIP is Rectangular.
  • The DIP is used because number of Transistor package handel the number of connection in IC.
  • DIP has 2 parallel Row of electrical connecting pin.


What is DIP (Dual In-line Package) / DIP in detail .


  • The above photo shows three DIP14 ICs. Common packages have only four and 64 leads.
  • DIP is made from plastic pressed around silver frame that support device interface and provide connection.
  • The DRAM chip is used in DIP packaging.
  • DIP is used for processor when the number of signals going to and from them grew large scale data transmission.
  • DIP packages include many analog and digital integrated circuit types, such as transistor panels, switches, light diodes, and resistors. Standard IC sockets may include DIP plugs for ribbon cables.

Thnak you so much for reading the  What is DIP (Dual In-line Package) packaging.


Know about the more packaging in detail click in given link.
  1. PGA (Pin Grid Array).Click Here
  2. SGPA (Staggerd Pin Grid Array).Click Here
  3. MCM (Multi Chip Module).Click Here
  4. LCC (Leadless Chip Carrior).Click Here
  5. PLCC (Plastic Leaded Chip Carrior).Click Here
  6. TC (Tape Carrior).Click Here
  7. CPU Packaging in detail.Click Here


What is DIP (Dual In-line Package) / DIP in detail .

CPU Packaging in Detail / Explaination of DIP,PGA,SPGA,MCM,LCC,PLCC & Tape Carrier packaging.

CPU Packaging

  • CPU packaging  is used for control damage of the processor.
  • A protective exterior packaging is supplied to the actual microprocessor and its associated electronic circuits. It's the packaging you see when looking at a processor, not the microprocessor. The packaging of the manufacturer is typically ceramic or plastic.
  • The external coverage of the processor protects its core (also known as the die) containing the microchip and the cable connected to the mounting pins of the processor. There have been a number of packaging types used in processors.
  • Several different packaging designs for the CPU chip die were used during development time of the computer. There are advantages and inconveniences of each type of packaging. The LGA (Land Grid Array) package contains the most advanced CPUs today, however, some common packages can still be reviewed. 
  • The packaging structure links the processor's slot to the motherboard interface. 


CPU Packaging in Detail / Explaination of DIP,PGA,SPGA,MCM,LCC,PLCC & Tape Carrier packaging.


Processor Die :

Processor die is a single continuous piece of semi-conductor material (usually silicon). A die may contain a number of cores. Up to 15 are available in the Intel product line. Processor die is where the transistors that make up the CPU actually reside. 


Type of Packaging :

  1. DIP (Dual Inline Packaging).Click Here
  2. PGA (Pin Grid Array).Click Here
  3. SGPA (Staggerd Pin Grid Array).Click Here
  4. MCM (Multi Chip Module).Click Here
  5. LCC (Leadless Chip Carrior).Click Here
  6. PLCC (Plastic Leaded Chip Carrior).Click Here
  7. TC (Tape Carrior).Click Here

Thnak you so much for reading the  CPU Packaging in Detail / Explaination of DIP,PGA,SPGA,MCM,LCC,PLCC & Tape Carrier packaging.


CPU Packaging in Detail / Explaination of DIP,PGA,SPGA,MCM,LCC,PLCC & Tape Carrier packaging.

Share Market / What is a share and share market?

What is Share

A share is generally part of a company's ownership. An individual who acquires a part of the capital of a business becomes a shareholder in the assets of that company, and that person receives an annual dividend share in the company's profits.

In the finance sector, the share is an accounting unit for different financial instruments, shares, limited partnerships and REIT. A document issued by a company that authorizes its owner to become a proprietor of the company is simply a share or a stock. A share is issued or bought from the stock market. A share is issued. 

You can earn a share and by selling the shares you gain a capital gain, the dividend plus and the capital gain. You can then earn a dividend plus. There is also, however, the risk that you will sell the share at a lower price. 

Share Market / What is a share and what is a share market?
Share Market / What is a share and what is a share market?

Stock and Share Facts: 

Over time, stocks have an average annual return of approximately 10 percent, but stocks do not offer a guarantee of returns and can also value, even over the long term. 

With an equity or a share you are the company's partial owner and in certain company issues you have voting rights. 

Inventory investments can generate dividend returns, even if the price is the same. 

Open a Zerodha online trading and demat account and benefit from the lowest trading experience.


What is share market?

sharemarket serves as a source of capital for enterprises as a major role in the share market. Companies that wish to expand their business can share their business. Stocks / shares are the property of the share market of the company sold to investors. Individual stocks constitute the ownership of a small unit company. These small units are referred to as stocks that can be bought or sold on the sharemarket. 

Share market is like a corporate-investor interface. The stocks of companies are listed in the share market. These inventories are available for purchase by investors. In order to sell their stocks, the money collected is the accumulated capital of their companies. The main advantage of raising capital from the share market is the freedom of interest. This accumulated capital is used by companies. In contrast to bank loans, if the interest or the fund is borrowed, no interest is claimed by the share capital. From an investment point of view, the stock market is the best option on a long term basis. Besides investors, money on the equity market is very liquid. You can easily sell your holdings on the day you want it. 


Share Market / What is a share and what is a share market?
Share Market / What is a share and what is a share market?

Most of them are like gambling on the share market. People believe that playing the share market simply means' purchasing high and selling low,' people don't worry about why stock prices drop. In reality, however, the share market functions much more logically than a roulette game. It is not gambling for trained investors, it requires pure logic of business. The share market can be predicted fairly accurately if it is properly practiced. However, many of them do not want the pain of understanding the logic of the share market. 

We have two major stock markets in India, Bombay Stock Exchange (BSE) and National Stock Exchange (NSE). If you want to buy stocks from the bombay stock exchange then you don't need to go to Bombay or Delhi. He can just approach a stock broker or do it on his own. By opening an online trading platform & Demat account, you can do yourself. All major banks such as ICICI, SBI, HDFC, etc., provide online trading platforms these days.

There are two kinds of share markets:

Primary Market:

By issuing shares on the primary market through IPO process a company or government raises money. 
The problem can be public or private placement. The issue is public when shares are allocated to more than 200 people; if they are allocated to less than 200 individuals, the issue is private. 
The share price can be based on the fixed price or the issue of building a book; the issuer decides the fixed prices, which appears in the offering document; where the price of an issue is determined based on the investors ' demand. 

Secondary Market:

In the secondary market, the shares purchased on the primary market can be sold. The secondary market operates via the counter (OTC) and the traded exchange market. OTC markets are informal markets in which a particular transaction to be settled in the future is agreed by both parties. The traded markets of the exchange are highly regulated. Also known as the auction market where all transactions take place through the exchange. 


Thnak you so much for reading the  Share Market / What is a share and what is a share market?


Share Market / What is a share and what is a share market?


Data communication in detail / data communication and networking.


Data communication


Data communication means exchange of data by way of transmission mediums such as wire cables between the source and a recipient. The communication of data shall be said to be local if the communicator is situated in the same building or geographically similarly restricted.

Source and recipient meanings are very simple. The data transmission device is known as the source and the receiving device is called the receiver. Data communication aims at data transfer and data maintenance, but not at the actual generation of information at the source and recipients in Data communication. 

Data communication in detail / data communication and networking.
Data communication in detail / data communication and networking.

A system of data communication can collect data from distant locations via data transmission circuits, and then deliver the results to remote locations. A larger view of the data communication networks is provided in the figure. Different currently widely used data communication techniques evolved either to enhance existing data communication techniques or to replace them with better features and options. The selection of communications systems also involves data communication, for example, baud rates, modems, routers, LAN, WAN, TCP / IP or ISDN. Therefore, these terms should be reviewed and understood and data communication methods developed gradually.

Data communication in detail / data communication and networking.
Data communication in detail / data communication and networking.


Basic Components of data communication.


Sender: The device that generates the message and sends it.

Receiver: The message is received by the device is called receiver.

Message: It is to be communicated information or data. It can be a combination of text, numbers, pictures, sound or video.

Medium: It's the physical channel or path by which the message is transmitted to the sender. The medium can be mounted as twisted pair wire, coaxial wiring, optic or wireless, such as laser, radio and microwave. 

Protocol: This is a set of rules governing interdevice communication. Both sender and recipient follow the same communication protocols. 


The effectiveness of data communications depends on four basic characteristics these are follows.

  1. Delivery: Data shall be delivered to the correct destination in the correct order. 
  2. Accuracy: The information must be deliver accurately. 
  3. Timeliness: the data should be provided in a timely manner. 
  4. Jitter: The uneven time of arrival of the packet is causing uneven quality. 

Networking



Networking means the entire computer networking process, including wired and wireless technology, in terms of hardware, protocols and software. It applies theories from various fields of technology such as IT, computer science and computer / electrical engineering. 

Networking, also known as computer networking, is an exchange of information between nodes over an information system medium. Networking not only includes network design, building and utilization, but also network infrastructure management, maintenance and operation, software and policies 

Data communication in detail / data communication and networking.
Data communication in detail / data communication and networking.

To know more about the networking and it's type click in given link.

click here.


Thnak you so much for reading the  Data communication in detail / data communication and networking.


Data communication in detail / data communication and networking.

The Marketing and it's Concept / Five Marketing concept in Detail.

 Marketing 

Marketing refers to the business of a company in which a product or service is purchased and sold. It includes publicity, sales and delivery of products to individuals. Those who work in marketing departments of companies try to get their attention through slogans, packaging design, celebrity approvals and media displays. 




Marketing is all that a company does to gain and maintain relations with its customers. Even small tasks such as writing letters of thank you, playing golf with a prospective client, making prompt calls and meeting a past coffee client are marketing. The aim of marketing is to match the products and services of a company with those who need them and want them to ensure their profitability. 

The process in which goods and services are transferred from concept to customer. Includes the coordination of 4 P marketing elements:

(1) product identification,selection and development,
(2) price determination and 
(3) customer distribution channel selection, and 
(4)promotional strategy development.

For example, the development and selling of new Apple products includes improved applications and systems, depending on the ability of customers and where the other Apple products are sold at different prices.




5 concepts of marketing.

The marketing concept is the business strategy companies use to meet customer needs, increase sales, maximize returns and overcome competition. Five marketing concepts are adopted and implemented by organizations.

The business philosophy of marketing concepts is an idea in which brands must analyze and strive to meet the needs of their potential customers. Marketing is a management department which tries to do custumers happy.

In the field of marketing, companies will develop strategies to meet customer requirements, increase sales and maximize profit.Five alternative concepts allow organizations to develop and implement their marketing strategies are follows.

  1. The Production Concept.
  2. The Product Concept.
  3. The Selling Concept.
  4. The Marketing Concept.
  5. The Societal Marketing Concept.

The Production Concept.

The concept for manufacturing is the most operational in this list than any other marketing concept. It tells the human truth that we prefer easy and inexpensive products. This concept was founded in the early 1950s in the period of production of capitalism. During this period, companies primarily dealt with issues of production, production and efficiency. This was also the time of the creation of the Says Law, which spanned the idea of demand and supply. 

The idea is to make companies want to produce large-scale cheap products to maximize profitability and scale in maximum volume. Companies assume that the main interests of consumers are product availability and low prices, whereas customer requirements may not be fully addressed. 

This is most likely the most efficient approach if a business operates in very high growth markets or has significant potential for economies. 



The problem with this concept is that companies are at risk of not creating quality products and may have problems with impersonal production for customers. The use of developing countries to produce cheaper products in higher quantities is an example of this. Ford cars that manufactured a ton of cars over their assembly lines, but without customizations or user input, are another history example. 

The Product Concept.

The product concept does not focus so much on production, but on the customer. Potential clients favor quality, performance or innovative products. 

This marketing concept relies on potential customers and on the close connection between their brand loyalty and product options, their quality and the benefits of the product and the business they invest in. 

This is most frequently seen in our obsession with Apple products, and our new gadgets and features await our launch.

This marketing concept focuses on the production and improvement of superior products over time. The problem is that many companies do not balance the need for a product while understanding what marketing needs. There is a fine line between customer focus and defining your role and your industry leadership. 



The Selling Concept.


The idea is that "consumers will not buy enough of the products of the company unless it undertakes a major promotion and sales effort." The sales concept. The management is focused not on building long-term, profitable client relationships, but rather on selling transactions. 

The aim is not to do what the market wants, but to sell what the company does. This aggressive sales program is extremely risky. The Marketer assumes that customers are coaxed in selling the product they like, if they don't like it, they may forget their deception and buy it later again. Usually, this is very bad and expensive. 



The sales concept is usually practiced with unsuccessful products. The unintended goods, such as insure or blood donations, are not usually the idea of buyers. These sectors need to be good at tracking and selling prospects for a product. 

The Marketing concept.

The marketing concept is "the fulfillment of organizational objectives relying on knowledge of the needs and wants of the target markets and on better results than the competitors." 

The concept of marketing is competitiveness. It is a concept of marketing, which considers that a company's success depends on marketing efforts that offer better value than their competitors. The concept focuses on the needs and desires of a marketing objective and offers a better value than its competition. With marketing, it's your goal, compared to your competitors, that you prefer. Significant is the competitive advantage.

The "customer first" approach is taken by management in this area. The customer focus and value are the routes to achieve sales and profit under the marketing concept. The marketing concept is a "sense and response" philosophy that focuses on customers. It is not the task to find the right clients, but to find the right products. Two extreme concepts and totally different from one another are the marketing concept and the sales concept. 



The Societal Marketing Concept.

The concept of societal marketing contains "Marketing strategy should provide customers with value that promotes or enhances the well-being of both the consumer and society." It requires sustainable, socially and eco-friendly marketing to meet the needs of consumers and enterprises today, while also preserving or improving future generations ' ability to meet their needs. 

The concept of social marketing puts human welfare first and satisfies the desires. The global warming panic button is pushed and the use of our resources requires revelation. So companies try to implement the concept of social marketing either fully or partially. 


Thnak you so much for reading the  The Marketing and it's Concept / Five Marketing concept in Detail.